2BE1 series water ring vacuum pump is a high efficiency and energy saving product developed by our company.
This series pump is single stage single action structure, which has the advantages of simple structure, easy maintenance, reliable operation, high efficiency and energy saving. Relative to the current widely used SK, 2SK, SZ series water ring vacuum pump with high vacuum, low power consumption, reliable operation, and other significant advantages, is SK, 2SK, SZ series water ring vacuum ideal alternative products.
The main features of 2BE1 series water ring vacuum pump and compressor structure produced by our company are as follows:
1 bearing can choose the original imported bearings, to ensure the precise positioning of 2BE1 vacuum pump impeller and the high stability of the running process.
2 impeller material is made of ductile cast iron or steel plate, stainless steel welding, fully guarantee the stability of the 2BE1 vacuum pump impeller in a variety of harsh conditions, and greatly improve the service life of the 2BE1 vacuum pump.
3 the pump body is made of ductile cast iron or steel plate and stainless steel plate, which improves the service life of 2BE1 vacuum pump.
4 coupling (direct drive) uses the standard high strength elastic coupling, the elastic element uses the polyurethane material, the movement stable reliable, the service life is long.
5 unique overhead type gas water separator, save space, and reduce the noise.
6 casting all use resin sand casting, good surface quality. No need to be bored on the surface of the casting, so that the 2BE1 series vacuum pump cooling effect is better.
7 mechanical seal (optional parts) can be imported parts, to ensure that the 2BE1 series vacuum pump in the long run without leakage.
8 the inner wall of the pump body adopts the ellipse shape to ensure the best pumping effect.
9.2BE1 series vacuum pump exhaust system uses a unique PTFE plate structure (raw water pump for ball valve structure). The valve plate is covered on the outside of the exhaust hole plate, and a stainless steel baffle positioning on the other side, the variation of the valve plate with the entrance pressure and change its bending degree, the pump pressure can reach the entrance in the medium is discharged out of the pump. The structure avoids the over compression in the vacuum system, can automatically adjust the exhaust area to reduce energy consumption, so as to achieve the best running effect.
This series pump is single stage single action structure, which has the advantages of simple structure, easy maintenance, reliable operation, high efficiency and energy saving. Relative to the current widely used SK, 2SK, SZ series water ring vacuum pump with high vacuum, low power consumption, reliable operation, and other significant advantages, is SK, 2SK, SZ series water ring vacuum ideal alternative products.
The main features of 2BE1 series water ring vacuum pump and compressor structure produced by our company are as follows:
1 bearing can choose the original imported bearings, to ensure the precise positioning of 2BE1 vacuum pump impeller and the high stability of the running process.
2 impeller material is made of ductile cast iron or steel plate, stainless steel welding, fully guarantee the stability of the 2BE1 vacuum pump impeller in a variety of harsh conditions, and greatly improve the service life of the 2BE1 vacuum pump.
3 the pump body is made of ductile cast iron or steel plate and stainless steel plate, which improves the service life of 2BE1 vacuum pump.
4 coupling (direct drive) uses the standard high strength elastic coupling, the elastic element uses the polyurethane material, the movement stable reliable, the service life is long.
5 unique overhead type gas water separator, save space, and reduce the noise.
6 casting all use resin sand casting, good surface quality. No need to be bored on the surface of the casting, so that the 2BE1 series vacuum pump cooling effect is better.
7 mechanical seal (optional parts) can be imported parts, to ensure that the 2BE1 series vacuum pump in the long run without leakage.
8 the inner wall of the pump body adopts the ellipse shape to ensure the best pumping effect.
9.2BE1 series vacuum pump exhaust system uses a unique PTFE plate structure (raw water pump for ball valve structure). The valve plate is covered on the outside of the exhaust hole plate, and a stainless steel baffle positioning on the other side, the variation of the valve plate with the entrance pressure and change its bending degree, the pump pressure can reach the entrance in the medium is discharged out of the pump. The structure avoids the over compression in the vacuum system, can automatically adjust the exhaust area to reduce energy consumption, so as to achieve the best running effect.
